An awesome couple who are good friends were married in late 2023. When he proposed to his future wife it was on a beach on the island of Kaui Hawaii. As a wedding present for them we designed this circular panel measuring 16 inches in diameter from Kaui beach pictures and also utilized some ideas […]
Our clients had recently purchased a 100+ year old home in Red Deer. The previous owner advised them that this home was called the “Hare House” and they left behind this old painting on a piece of wood titled “Hare House” Our clients wanted this painting of the “Hare House” turned into a stained glass […]
A few years ago our clients lived in Southern Alberta and were selling their home, with the intent to build a new craftsman style home west of Rocky Mtn. House. They had designed the sidelight and door panels and commissioned us to build them which they would eventually install in their new handmade front door. […]
We were asked by a friend who belongs to The Order of The Eastern Star, to make this Celtic Cross as a gift for the incoming Worthy Grand Matron. It measured approximately 7 inches wide by 10.5 inches high and was symbolic of the WGM’s emblems. We use black cathedral glass with clear granite for […]
In the late fall of 2014, we were asked to see what we could do for a large church window for “The Gaetz Memorial United Church” in downtown Red Deer Alberta. The church recently installed new main entrance doors, with 2 large windows above these doors. The church committee provided us with sketch design concept. […]
Shaw TV Red Deer found our website the other day and decided it’d be a great story to share. Check out the video and let us know what you think!
Island Lake in glorious sunshine. We used a lot of very interesting wonderful art glass from Spectrum, Bullseye, Uroboros, Wissmach and Kokomo to complete this panel which measures with the 1/2 zinc frame 26.5 inches wide by 18. 5/8 inches high. If you scroll down to the bottom of this posting you will see the […]
The Blue Heron Panel measures 28 in by 18 in, this photo taken in full sun. What always fascinates us about stained glass is how it changes with the light from sunny, cloudy, rainy, snowy days along with time of the year and the ever changing seasons. Design by Mark Waterbury The Blue […]
In the fall of 2010 we were asked to see what we could do for a large stained glass church window for The United Church in Rimbey Alberta. We provided some conceptual ideas which the Church committee, tentatively agreed upon. We then enlisted the stained glass design experts at Paned Expressions Studios Inc. in Edgewood […]
This is a beveled panel using GST colored wheat bevels. The panel measures approximately 23 inches by 33 inches. This panel is going to be mounted in a light box in a new kitchen renovation for a home in Central Alberta. We finished this panel and it was picked up by our clients on […]
This Sprint Racing Car was made many years ago from a photo for our son Greg who wanted to give it as a gift to one of his racing friends in Edmonton, Alberta. The center of the wheels was made using sheet foil with a thin layer of solder which gives the chrome look. Greg […]
Full Story »
Many years ago before we had a digital camera we made this from “Pattern of the month” which is available on Spectrum’s website under their free pattern section. We had to use our saw to cut most of the glass and this proved difficult at times as Spectrum’s Waterglass is somewhat soft and can easily […]
Full Story »
Some 10 plus years ago we had a client commission us to make from a photograph a stained glass panel of a stock race car. Flory did the art work on the car and together we came up with the panel design from the photograph, it was a neat commission that our client gave as […]
Full Story »
Over the years we have made a few of these, in fact a similar one hangs in our home and it was the first piece of stained glass that Bob made some 14 years ago. Designer unknown
Full Story »
If our memory serves us correctly we were asked by friends of the owners of Solderglen Ranches Ltd located north of Airdrie Alberta to make this panel of their Cattle Brand. We used red Bullseye glass for the brand and border. Having a diamond saw allowed us to make the S in one piece.
Full Story »